Irrigation zone repair focuses on the specific section of your sprinkler system that is not working correctly, rather than replacing the entire system. At Dallas Landscape & Irrigation, the repair may include the valve, wiring, sprinkler heads, pipe connections, or the control components tied to that zone.
Typical parts of a zone repair
- Valves: fixing a zone that will not turn on, will not shut off, or is getting weak flow
- Wiring: repairing damaged or disconnected wires between the controller and the zone
- Heads and nozzles: replacing broken, clogged, or misaligned sprinkler heads in that zone
- Pipe fittings: addressing cracks, leaks, or loose connections within the affected area
A proper zone repair starts with testing each part of the line to find the exact failure point. This helps avoid unnecessary work and gets water back to the right areas of your landscape.
If one section of your system is failing while the others work normally, a targeted repair is often the best solution. Request an estimate from Dallas Landscape & Irrigation to have the affected zone inspected and repaired.